
Record the sequence before naming a cause
When a lift stops around the time of a building power interruption, the timing is useful evidence. It is not a diagnosis. Record when the interruption began, which lifts were affected and what the normal passenger display showed. Include whether other building services were affected at the same time.
Keep observations factual: 'lobby lights went off at 14:10' is more useful than 'the controller failed because of low voltage'. If the building has an electrical contractor or an existing power-monitoring record, ask the responsible person to preserve the relevant information for the lift technician.
Separate three different records
Create separate entries for the reported lift symptom, the building supply event and the service response. Link them with a shared incident number. This prevents an unverified power explanation from becoming the permanent description of a recurring lift fault.
Record any generator changeover or other supply event only when confirmed by the authorised building operator. Passenger observations, electrical measurements and controller history come from different sources. The service team can assess them together while keeping their limitations clear.
Avoid repeated demonstrations
Do not repeatedly cycle the supply, reset protective devices or send passengers on test rides to reproduce an interruption. Restricted controls and electrical work belong to authorised personnel. Follow the building's out-of-service arrangements and obtain a clear return-to-service decision from the responsible service team.
If someone is inside a stopped cabin, use the installed communication system and the building's assistance procedure. Do not attempt to open landing doors or improvise a rescue. Preserve a clear contact route while the responsible people organise assistance.
Close the incident with evidence
The close-out entry should show who attended, what was inspected, what work was completed and any remaining action. Keep the supplier's actual findings separate from the building committee's questions. If no cause was confirmed, record that uncertainty rather than filling the gap with a convenient explanation.
For a Karachi repair assessment, provide Shinkai with the incident timeline, lift identity and available building power records. A concise event log can support the visit, but it does not replace equipment checks or establish whether the building supply, lift equipment or another factor caused the event.