KARACHI • LIFT INSTALLATION, REPAIR & MAINTENANCE0304 3083143 ↗
SHINKAI JOURNAL · FAULT REPORTING

New Lift Noise or Vibration: Turn a Complaint into Useful Evidence

By Shinkai Lift Service · Published · 2 min read

Prepare a clear report of unusual lift noise or vibration, with location, journey stage and service history for a professional assessment.

Illustrative scene: New Lift Noise or Vibration: Turn a Complaint into Useful Evidence
Illustrative scene for this guide.

“The lift is noisy” can describe a door sound, a cabin rattle or a disturbance noticed from an adjacent room. Separating what was heard, where it was heard and when it happened helps a service team plan an assessment without guessing at a component.

Start with the observer’s location

Record whether the sound was noticed inside the cabin, on a landing or in a neighbouring room. State whether it happened during door movement, starting, travelling or stopping. If several occupants report it, group their observations by the same lift and time period instead of treating every message as a separate breakdown.

Describe the sound in ordinary language: intermittent tapping, a new scraping sound or vibration during stopping. Avoid presenting a diagnosis such as “bearing failure” unless a professional assessment has established it.

Explain what changed

Useful context includes the first known occurrence, whether the symptom is becoming more frequent and any recorded recent repair. Building work near a shaft or changes in nearby room use may also matter, but timing alone does not prove the cause. Share the context without attributing responsibility before inspection.

Collect evidence without creating another risk

A recording made from an ordinary accessible position may capture the pattern. Do not open panels, enter machinery spaces, place a recording device inside equipment or ride repeatedly to provoke a fault. If the sound accompanies abnormal movement or another unsafe condition, notify management and follow the site’s restriction procedure.

A phone recording cannot measure compliance with acoustic or vibration limits. If a specification is disputed, agree who will perform an appropriate assessment, what will be measured and what acceptance criteria apply to the installation.

Define what resolution looks like

Ask the service provider to distinguish a diagnosed equipment issue from a building transmission or acoustic question. Keep the findings and proposed action in writing. Where corrective work is performed, record the completion checks and any residual observation requiring follow-up.

Close the complaint against the original description. “Part replaced” is incomplete if management still does not know whether the reported sound remains. For Karachi sites, send Shinkai the observation record and access arrangements to discuss an assessment.

Call ShinkaiWhatsApp ↗